Brush it on
Coat it on thick, like frosting a cake. No sanding, no scrubbing. Then walk away.
10 MIN WORK
STRIP + CLEAN
OUR BESTSELLER · NO FUMES · MADE IN USA
FurnitureStripper Kit.
Strips decades of paint and varnish in 2 easy steps without the harsh fumes.
$70.00
$75.00 SAVE $5 THE WHOLE JOB · ONE BOX
THIS WEEKENDSAVE 20% ON OUR KITS THIS LABOR DAY!
FREE SHIPPING OVER $80 · 30 DAY GUARANTEE · SHIPS FROM ILLINOIS
INSIDE THE BOX
The Stripper
Soy based gel that clings to carvings and lifts multiple layers in one pass.
The Finishing Cleaner
Neutralizes the surface so your new stain takes evenly.
The Deluxe Extras
A 3M mask, two pairs of gloves, and goggles, plus the scraper and three brushes for the job. Suit up without the hardware store run.
A soy based gel stripper and its finishing cleaner, made to work as one system. The gel clings to vertical surfaces, so cabinet doors and banisters strip in place, and it stays wet while it works.
Zero methylene chloride, zero NMP, low VOC. Made in Illinois.
COVERAGE100 TO 150 SQ FT PER 1/2 GAL
DWELL, LATEX + OIL + CHALK50 TO 60 MIN
DWELL, POLY + LACQUER + EPOXY5 TO 8 HRS
READY SIGNALFINISH BUBBLES
CLEANUPFINISHING CLEANER + WATER
SIZES1/2 GAL KIT · DELUXE KIT
DELUXE KIT ADDS3M MASK · 2 PAIRS OF GLOVES · GOGGLES · SCRAPER · 3 BRUSHES
THE SATURDAY RITUAL
Three steps. One afternoon.
Let it work
Latex and chalk paint bubble up within the hour. Polyurethane and epoxy take 5 to 8. The gel stays wet the whole time, so overnight is fine too.
1 TO 8 HRSScrape it clean
Decades slide off in ribbons. Wipe down with the Finishing Cleaner and it's ready for stain.
15 MIN WORKSEE IT WORK
WATCH IT let go
The moment twenty years lets go.
NO HARSH FUMES · NO METHYLENE CHLORIDE · JUST TIME AND A SCRAPER
What it strips
- Latex and oil paint, multiple layers in one coat
- Varnish, lacquer, shellac and polyurethane
- Detail work: carvings, spindles, trim
- Wood, metal, brick and concrete
Straight answers
- Slower than the toxic stuff, on purpose. Let it sit.
- Won't raise the grain or fur the wood.
- Epoxy is the slow lane: give it 5 to 8 hours.
- Skin contact? Rinse with water. That's it.
SOY BASED
NO METHYLENE CHLORIDE
INDOOR SAFE
MADE IN THE USA
THE PROOF
Drag the line. See for yourself.
FREE SHIPPING OVER $80 · 30 DAY GUARANTEE · SHIPS FROM ILLINOIS
Same job. Different air.
Every stripper takes the finish off. The difference is what it takes out of the room with it.
THE AIR
THE REST OF THE AISLEMethylene chloride was in consumer strippers until the EPA banned it in 2019. Much of the citrus aisle quietly leans on NMP instead.
GREENEZA soy gel with zero methylene chloride, zero NMP, and low VOC. Made in Illinois.
THE WAIT
THE REST OF THE AISLEConventional strippers keep the schedule to themselves, so you test a corner, wait, and test again.
GREENEZLatex, oil, and chalk lift in 50 to 60 minutes. Poly, lacquer, and epoxy in 5 to 8 hours. No test corners required.
THE VERTICALS
THE REST OF THE AISLEThin strippers obey gravity, which is bad news for cabinet doors, banisters, and anything you cannot lay flat.
GREENEZThe soy gel clings where you brush it, so vertical work stays vertical and the drop cloth stays clean.
THE CLEANUP
THE REST OF THE AISLEMost strippers leave a residue the next finish has to fight, and they leave that fight to you and your sander.
GREENEZEvery kit ships with Finishing Cleaner, the second half of the job. It dissolves the residue so the next finish lands on honest wood.
THE BOX
THE REST OF THE AISLEBuy the can, then drive back for the mask, the gloves, the scraper, and the brushes.
GREENEZThe Deluxe Kit ships with a 3M mask, two pairs of gloves, goggles, a scraper, and three brushes. Everything the dresser needs, in one box.
4.6 STARS FROM VERIFIED BUYERS · 30 DAYS TO DISAGREE
The hard parts? Handled.
Everything that kept this project on the someday list, crossed off.
THE GUESSING
Other strippers made you guess. Scrape too soon and it smeared. Wait too long and you started over.
This one tells you when. The finish bubbles when it is ready. Watch, then scrape. That is the whole skill, and you already have it.
THE LAYERS
Coat, scrape, coat again. Three rounds deep and the 1970s were still holding on.
Six layers, one cycle. Janalee W. took six layers off her 1910 kitchen cabinets in one cycle, minimal sanding after. Her words, not ours. Yours could be next.
THE GHOSTING
Sandpaper that gummed up in minutes, and the old stain ghosting back through your brand new finish.
Gone, and it stays gone. Finishing Cleaner dissolves the residue after scraping, and with 0000 steel wool it lifts the old stain out of the grain in 15 to 30 minutes.
PHOTO REVIEWS
Reviewed by 177 verified buyers.
4.6
177 VERIFIED REVIEWS
FINISH THE JOB
Bare wood is a beginning. Pick its next life.
Paint, poly, lacquer, varnish. If a brush put it on, this takes it off.
Not sure about your piece? or email us
MON TO FRI · 9AM TO 5PM CT · REPLIES SAME DAY